Custom blue

adjustable single coil
bridge or neck
position   7.5 k ohms
S03
Vintage style strat
style replacment

handwound
with 42 awg P.E
6 k ohms
S04
Full capacity size
bobbin

for use without a cover
more room for
additional windings
10 k ohms
S05
B-17:
5.3 K ohms     42 AWG
Two Ceramic 8 magnets
Cloth insulated hook up
wire
Excellent for bridge or
middle position
Heavy lows,  highs
crisp
S11
MAGNETO
6 alnico II magnets in line w/
strings
5 alnico V magnets between
spacings
This set-up allows you to bend
strings w/out losing volume
7 .1K 0hms 43 AWG  PE
(handwound)
Cloth insulated hook-up wire
Will drop into standard Strat
style cavity
S12
S13
Heavy Metal:
Handwound/wax potted
6.5 K ohms   42 A.W.G
6 Alnico II 3/16 dia slugs are
seated into a 4.8 mm thick pure
steel base plate.  Two
conductor braided ground
0utput level of a high quality
humbucker
Will drop into single coil cavity
PEARLOID :
Made from 3-ply pick-guard
material
6.4 K ohms 43 A.W.G PE /
Handwound
6 Alnico II slugs
Stainless steel adjustment
screws
Cloth pullback hookup wire
Will drop into a Strat cavity
Tele-style twine sheilding
S14
IRON CLADS

The best deal around for handmade / handwound pickups
Fits under a standard Strat- style cover
Ceraamic 8 bar magnet
Cloth pullback wire
Middle pickup reverse wound and reverse polarity
Pickups average 6 K ohms can be overwound to up to 8 K ohms
C-47
8.6 K ohms  43 AWG PE
Handwound/ wax potted
1/4" alnico V slugs
Cloth push back wire
Tele- style twine shielding
around the coil Brass bottom
plate with extra ground wire    
Clean and powerful
S15
S16
Shadow Caster

1/4"dia AL-3 SLUGS
7.3 K ohms
43 AWG (red)
S17
P-38
43 AWG HF
6.8K 0hms
Handwound
Two- conductor wire
Cer V magnet
Wax potted, feedback
removed
Shielded w / black cloth
coil tape
S10
GLORY STOMPER

10.9k ohms
43 AWG  (red)  HAND-WOUND
Six Alnico II slugs
Bridge string spread
Cloth pushback wire
chrome ring
Springs and screws included
S18
OLGA STYLE

44 AWG RED
Handwound to 10.6k ohms
Alnico V.   9x17mm dia.

Wax Potted to remove
microphonics
Cloth push-back wire
Black Vulcanized
Fiberboard flatwork
S18
UTZI

Replaces standard bridge
position pickup for Strat
and helps alleviate ice pick in
the ear drum.
8.9 K ohms
44 AWG
Handwound
Wax Potted / Feedback
Removed
Sounds silky smooth when
combined w/ middle pickup.
Adjustable slugs allow you to
dampen or brighten any of the
strings individually.
BLUE SINGLE
6.5K ohms
AL-4 slugs
Bridge string spread
Handwound w/ 42 AWG
Cloth pushback hook-up wire
Wax potted feedback removed
Will make you rock
Stainless steel mounting screws
& springs included
STRAT TYPE WITH EXTRA
SLUG

42 AWG HN
HAND WOUND TO 6.5 K OHMS
CLOTH PULL BACK WIRE
SCREWS/SPRINGS &
CUSTOM COVER INCLUDED
7 ALNICO-II  RODS
EXTRA SLUG BETWEEN THE
E&B WILL GIVE MORE KICK
WHEN SOLO SHREADING
S19
S20
S21

BLACK N BLACK  set

BRIDGE 13.9K OHMS 44AWG
MIDDLE  9.1K   OHMS 43AWG
NECK     6.3K   OHMS 42AWG
1/4"DIA AL-5 SLUGS
S22
MUTHRA :

7.9 K OHMS
42 AWG HN
Six Alnico II rods
Handwound / Wax Potted /
Feedback Removed
Suited for fat slot in neck position
Sound of a Jazzmaster, but
fastens like a P-90
Mounting screw holes are located
between the E&A / B&E slugs
Dimensions are 29.5mm wide,
85.2mm long
POMBERO

7.6 K ohms
43 AWG (red)
Cer V bar mag
Handwound / Wax Potted /
Feedback Removed
Two conductor braided ground
wire
Drops in Strat
S23
S26
BLADE SINGLE COIL
GUITAR PICKUP

6.9 K OHMS
43 A.W.G red
Hand-wound
Wax Potted /
Feedback Removed
Cover/ Springs /
Screws included
S28
Pickup OHMS are approximate as pickups are wound when ordered
Naked Angel

9.8k ohms
43 AWG  (red)  HAND-WOUND
Six 1/4"Alnico III slugs
Bridge string spread
Cloth push-back wire
Chrome ring
Springs and screws included
Wax Potted
S33
LIPSTICK TUBE

6.9 K 0hms
44 AWG
Alnico V bar mag
South to strings
Handwound / Wax Potted /
Feedback Removed
S34